Owner`s manual

neither the username nor password is required, and

every user will have access to all admin functions.

From the User Management Menu, select the number of the

user to modify, followed by a carriage return <cr>. The

unit responds:

RPC-3 AND RPC-3A OPERATIONS

____________________________________________________________

NOTE Password can be enabled or disabled for serial

Enter choice, CR to exit

User name: engineering

1) . . . Change Password

2) . . . Change Outlet List

Enter Request >

Factory default password is a carriage return <cr>. If

Password is enabled, the RPC requires password entry

before allowing the user to operate the RPC unit.

NOTE Password feature is case sensitive.

Select #1, “Change Password,” followed by a carriage

return. The RPC-3 or RPC-3A responds:

Enter Old Password:

Since the factory default password is a carriage return, hit

<Enter.> If this is not an initial set-up and a password has

already been set, enter the current password, followed by a

carriage return. If you enter the password incorrectly, the