Owner`s manual

RPC-2/RPC-2A QUICK START

____________________________________________________________

disabled from the factory. The

factory default password is a carriage

return. The RPC prompts for the old

password. Enter a carriage return. The RPC

prompts for a new password. Enter

a new password (maximum field length, 8

alphanumeric characters). NOTE: The

password feature is case sensitive. The

RPC asks you to confirm the new

password. A message confirms success of

the password change.

Programming

Receptacle Names

RPC-2/RPC-2A Select #2, “Change Outlet Name,” press

<Enter.> At “Enter Request,” select the

outlet number you wish to change; press

<Enter.> Enter a new receptacle name

(maximum field length, 10 characters); press

<Enter.> The new name will show in the

main menu for the corresponding outlet.

Enable/Disable

Confirmation

RPC-2A From the configuration menu, select #3,

“Enable/Disable Confirmation.” the

RPC responds with the option to toggle

confirmation on or off. NOTE The

factory default setting is Enabled:

Disable Confirmation? (Y/N)