Owner`s manual

Accessing Main Menu Power on the RPC unit. The following main

menu appears:

RPC-3 Telnet Host

Bay Technical Associates

Unit ID: RPC3

RPC-3 Menu:

1) . . . Outlet Control

2) . . . Manage Users

3) . . . Configuration

4) . . . Unit Status

5) . . . Reset Unit

6) . . . Logout

Enter Selection:

If the main menu fails to appear, ensure the correct cables and adapters are

being used and they are properly connected. Also, verify the serial

communication parameters are correctly configured.

If this is not an initial setup and username and/or password have been

enabled, you will be prompted to enter a username and/or password.

When a successful username and/or password has been entered, the main

menu (above) appears.

5.3.4.1 Outlet Control

To set or change the status of receptacles, select #1 “Outlet Control” from

the main menu. The following status menu appears:

Available RPC3 Outlets

For command summary, enter HELP

Circuit Breaker : On

Selection Outlet Outlet Power

Number Name Number Status

1 OUTLET 1 1 Off

2 OUTLET 2 2 Off

3 OUTLET 3 3 Off

4 OUTLET 4 4 Off

5 OUTLET 5 5 Off

6 OUTLET 6 6 Off

7 OUTLET 7 7 Off

8 OUTLET 8 8 Off

RPC >