Owner`s manual

40
1) . . . OUTLET 1
2) . . . OUTLET 2
3) . . . OUTLET 3
4) . . . Router 1
5) . . . OUTLET 5
6) . . . OUTLET 6
Enter Request:
To return to the RPC > prompt, hit any key at the “Enter Request” prompt.
5.2.2 REMOTE ACCESS
5.2.2.1 MODEM CONNECTIONS
RPC-2 MD01 (Internal Modem) Using the RJ04X007 (RJ-11) modular
cable, connect either port labeled “LINE” on the back of the RPC unit to
the telco wall jack. Proceed to “Accessing Main Menu via Modem.”
RPC-2 RDR (External Modem) Plug the modem’s power supply into
receptacle number six on the RPC. Using the RJ04X007 (RJ-11) modular
cable, connect either port labeled “LINE” on the back of the RPC unit to
the telco wall jack. Using another RJ04X007 (RJ-11) modular cable,
connect the remaining port labeled “LINE” on the back of the RPC unit to
the port labeled “LINE” on the external modem.
Using the 25MRJ45MD-8 adapter and the RJ08X007 (8-pin crossed)
cable, connect the DB-25 female port of the modem to the RJ-45 port
labeled “EIA-232” on the back of the RPC unit.
RPC-2 RDR/RPC-2 MD01 OPERATION & CONFIGURATION
____________________________________________________________