Owner`s manual

39
“Re-enter New Password” prompt. Changing the new password to a
carriage return disables password protection. See Programming a
Password above.
2. Change Outlet Name
From the status menu’s RPC > prompt, type CONFIG. The following
menu appears:
RPC > CONFIG
1) . . . Change Password
2) . . . Change Outlet Name
Enter Request:
Select #2, “Change Outlet Name,” and press <Enter.> The RPC responds:
1) . . . OUTLET 1
2) . . . OUTLET 2
3) . . . OUTLET 3
4) . . . OUTLET 4
5) . . . OUTLET 5
6) . . . OUTLET 6
Enter Request:
Enter the number of the outlet you want to change. If you want to change
the name of Outlet 4, type the number 4 at the “Enter Request” prompt,
followed by a carriage return. The RPC responds:
Enter:
Enter a new receptacle name (maximum field length, 10 characters),
followed by a carriage return. If you want to change the name of
Receptacle 4 from Outlet 4 to Router 1, type Router 1 from the “Enter”
prompt, followed by a carriage return. The RPC responds with the outlet
name menu displaying the name change to Outlet 4:
RPC OWNER’S MANUAL
____________________________________________________________