Owner`s manual

33
From the configuration menu, select #3, “Enable/Disable Confirmation.”
Depending on whether confirmation is currently enabled or disabled, the
RPC responds with the option to change the current status. NOTE The
factory default setting is Enabled:
Disable Confirmation? (Y/N)
4. Enable/Disable Status Menu
RPC-2A
From the configuration menu, select #4, “Enable/Disable Status Menu.” If
the Enable/Disable Status Menu feature is enabled, the following status
menu appears. NOTE The factory default setting is Enabled:
Circuit Breaker: On
1) Outlet 1 : Off
2) Outlet 2 : Off
3) Outlet 3 : Off
4) Outlet 4 : Off
5) Outlet 5 : Off
6) Outlet 6 : Off
RPC-2A >
If the Enable/Disable Status Menu feature is disabled, only the RPC-2A >
prompt appears.
RPC-2A >
Depending on whether confirmation is currently enabled or disabled, the
RPC responds with the option to change the current status. NOTE The
factory default setting is Enabled:
Disable Status Menu? (Y/N)
NOTE: “Outlet Control” works the same with status menu enabled
or disabled.
RPC OWNER’S MANUAL
____________________________________________________________