Owner`s manual

Enter the number of the outlet you want to change. If you want to change

the name of Outlet 4, type the number 4 at the “Enter Request” prompt,

followed by a carriage return. The RPC responds:

Enter:

Enter a new receptacle name (maximum field length, 10 characters),

followed by a carriage return. If you want to change the name of

Receptacle 4 from Outlet 4 to Router 1, type Router 1 from the “Enter”

prompt, followed by a carriage return. The RPC responds with the outlet

name menu displaying the name change to Outlet 4:

1) . . . OUTLET 1

2) . . . OUTLET 2

3) . . . OUTLET 3

4) . . . Router 1

5) . . . OUTLET 5

6) . . . OUTLET 6

Enter Request:

To return to the RPC > prompt, hit any key at the “Enter Request” prompt.

3. Enable/Disable Confirmation

RPC-2A

When a command is sent to TURN ON, TURN OFF, OR REBOOT a

receptacle, if the enable/disable confirmation feature is enabled, the RPC

responds asking you to confirm the command. For example, if the

command ON 3 is sent, and the enable/disable confirmation is enabled, the

RPC responds:

Turn On Outlet 3? (Y/N)

If the enable/disable feature is disabled, the RPC will not ask to confirm

the command.

RPC-2/RPC-2A OPERATIONS & CONFIGURATION