Owner`s manual

3
RPC-2 AND RPC-2A QUICK START
____________________________________________________________
2.1 RPC-2 AND RPC-2A QUICK START
EIA-232 SERIAL
CONNECTION
RPC-2/RPC-2A Using the 9FRJ45PC-1 adapter and the
RJ08X007 cable, connect the serial port
of your computer to the RJ-45 port labeled
“EIA-232.”
Load serial port communications software.
Set serial communications parameters to
9600 bps, 8 data bits, 1 stop bit, and no
parity.
OPERATION
Accessing Main Menu
RPC-2/RPC-2A Power on the RPC unit. The following
status menu appears:
RPC-2 Series
(C) 1997 by BayTech
F2.07
Circuit Breaker : On
1) . . . OUTLET 1 : Off
2) . . . OUTLET 2 : Off
3) . . . OUTLET 3 : Off
4) . . . OUTLET 4 : Off
5) . . . OUTLET 5 : Off
6) . . . OUTLET 6 : Off
RPC >
If the status menu fails to appear, ensure
the correct cables and adapters are being
used and that they are connected properly.