Owner`s manual

21
through the circuit breaker. If an overload condition occurs, the RPC
status menu is still accessible. If all circuits are closed, the circuit breaker
status menu will indicate “On.” If the circuit breaker is tripped, the
circuit breaker status will indicate “Off.”
RPC OWNER’S MANUAL
____________________________________________________________
3.7 GROUND
High-voltage surges and spikes can damage this equipment.
Although surges and spikes can result from a variety of causes, lightning
most often causes them. To protect from such power surges and spikes,
this unit must have a good earth ground.
4.0 CABLING
4.1 RJ-45 CABLES AND ADAPTERS
Important: All RPC models have an RJ-45 port for connecting to a
local EIA-232 device such as a computer terminal or external modem.
Most serial computers do not have RJ-45 connections; therefore, an
adapter is provided with this unit to convert from a DE-9 connector to
an RJ-45 connector (BayTech Part No. 9FRJ45PC-1). An adapter to
convert from a DB-25 connector to an RJ-45 connector is also
available from BayTech, upon request (BayTech Part No.
25FRJ45PC-1).
RJ-45 CABLES AND ADAPTERS