Owner`s manual

RPC OWNER’S MANUAL

____________________________________________________________

This document provides information required for installing and operating

your Remote Power Control Unit. It should allow the user to connect,

power up, and access an applications menu where the power of connected

equipment can be controlled. We suggest reading this manual carefully,

while placing special emphasis on correct cabling and configuration. If

you have any problems with your installation, please contact a BayTech

Applications Engineer at 228-467-8231 or call toll free anywhere in the

United States at 800-523-2702.

BayTech manufactures many remote site management products, data

switches, data collection multiplexers, remote power controllers, and

peripheral print sharers. If you would like information on any of these

products, please contact BayTech Customer Service.

We welcome any comments you may have about our products, and we

hope that you will continue to look to BayTech for your data

communication needs.

2.0 QUICK START

This section, “Quick Start,” describes the basic steps required to set up and

configure your RPC. Each Quick Start will discuss like models.

Section 2.1 RPC-2 and RPC-2A Quick Start

Section 2.2 RPC-2 MD01 and RPC-2 RDR Quick Start

Section 2.3 RPC-3 and RPC-3A Quick Start

If you need to further acquaint yourself with the RPC set up,

configuration, and operations, see the section entitled, “Detailed Operation

and Configuration.”