Owner`s manual

Gateway Select #3, “ Gateway.” Enter the RPC unit’s

Gateway address in dotted decimal format

(200.4.5.50).

Unit ID Select #4, “Unit ID.” Enter the RPC unit’s

Unit ID (64 chars max).

RPC-3 AND RPC-3A QUICK START

______________________________________________________

Access NOTE If username and password are

disabled (factory default), outlet users will

have access to all admin functions.

From the configuration menu, select

#5, “Access,” followed by a carriage return

<cr>. The RPC responds with a Login

Setup menu, allowing the user to

enable/disable user name and password for

both network access and serial port access.

If the option is currently enabled, you will

be asked if you want to disable. If the

option is currently disabled, you will be

asked if you want to enable. Answer “Y”

for “Yes,” or “N” for “No,” accordingly.

Outlets From the configuration menu, select #6,

“Outlets.” The RPC sends an Outlet

Operation Configuration Menu including

the following options:

1) Outlet Status display – enable/disable

2) Command Confirmation – enable/disable

3) Outlet Power-up Delay – programmable elapse

time before applying power to an outlet after unit

power-up, reset, or reboot.

4) Name Outlets – Program outlet names