Owner`s manual

CONFIGURATION IMPORTANT: For network access, you

must configure the IP address, subnet

mask, and gateway from the serial port.

RPC OWNER’S MANUAL

____________________________________________________________

NOTE: Network parameters, such as IP

Address, require a unit reset. All other

changes take affect immediately upon

accepting changes after exiting

configuration.

Select #3, “Configuration” from the main

menu. The following menu appears:

Bay Technical Associates

RPC-3 Configuration Menu

MAC Addr: 00.C0.48.05.53.A2

Unit ID: RPC3

Medium Stat: good

Active users: 1

Enter choice from menu, CR to exit

1) . . . IP Address : 0.0.0.0

2) . . . Subnet Mask : 0.0.0.0

3) . . . Gateway : 0.0.0.0

4) . . . Unit ID : RPC-3

5) . . . Access

6) . . . Outlets

7) . . . Exit

IP Address Select #1, “IP Address.” Enter the RPC

unit’s IP address in dotted decimal format

(200.4.3.50).

Subnet Mask Select #2, “Subnet Mask.” Enter the RPC

unit’s subnet mask in dotted decimal format

(255.255.255.0).