Owner`s manual

14
1) . . . Add user
2) . . . admin
The “Add user” option is presented any time
less than 8 users are defined. The “Delete
RPC-3 AND RPC-3A QUICK START
____________________________________________________________
user” option is presented any time one or
more optional outlet users are defined.
Deletion of admin user is prohibited.
Change Password From the User Management Menu, select
the number of the user to modify, followed
by a carriage return <cr>.
NOTE Password can be enabled or
disabled for serial login and network
login.
Select #1, “Change Password.” The RPC
responds, “Enter Old Password:” Hit
<Enter> for initial setup or enter current
password. The RPC responds, “Enter New
Password.” Enter a new password. The
RPC responds, “Confirm by Re-Entering
New Password.” Re-enter the new
password. NOTE: Password is case
sensitive.
Change User From the User Management Menu, select
List the number of the user to modify, followed
by a carriage return <cr>. Select #2,
“Change User List.” Enter the number of
the outlet(s) you want to give or remove
access. If more than one outlet, enter the
numbers separated by commas. Example:
2,6,8.