Owner`s manual

13
PC OWNER’S MANUAL
If the main menu fails to appear, ensure the
correct cables and adapters are being used
and that they are connected properly. Also,
verify the serial communication
parameters are correctly configured.
Outlet Control To set or change the status of the
receptacles, select #1 “Outlet Control”
from the main menu. From the RPC>
prompt, enter one of the following
commands: ON n, OFF n, REBOOT
where “n” is the outlet number you wish to
send the command. Entering an outlet
number of “0” sends the command to all
outlets. Type “MENU” to return to the
main menu.
NOTE The reboot command will only
reboot outlets that are turned ON; an
outlet that is turned OFF cannot be
rebooted.
Manage Users To add, delete, or modify a user, change
passwords, or change user lists, select #2,
“Manage Users,” from the main menu. The
following menu appears:
User Management Menu
To modify existing user, enter number of user.
To add/delete user, select appropriate menu
choice.
Enter request, CR to exit menus.