- Bay Technical Associates, Inc. OWNER'S MANUAL DATA SWITCH/POWER CONTROL DS2-RPC DS4-RPC, DS71 DS71-MD2 DS74, DS73

DS-RPC OWNER’S MANUAL

APPENDIX E

__________________________________________________________________________________________

APPENDIX E

ASCII CHARACTER DEFINITION

$BT Releases the module to receive the attention

character

$BTm Calls up a module (where m is a module number)

$BTm,p Calls up a module and port (where m is a module

number and p is a port number)

$BTB Locks the module in the binary mode. A “Break”

signal must be sent to clear this lock

$CONFIG Accesses the module configuration menu

$BTRESET Resets the unit. All communication will be lost if

attached via the modem