Installation manual

5 Attach the lifting handles to each side of the chassis.
6 Carefully lift the chassis off the support bracket and lower it onto the wood pallet (see Setting the
Chassis on the Shipping Pallet).
7 Re-install the removed fan trays:
a Set each fan tray into the chassis and push it firmly into place.
b Align and tighten the retaining screws.
Figure 74: Installing a Fan Tray
Caution
Do not use the fan tray handles to lift or maneuver the chassis. The handles on the fan
trays are not designed to support the weight of the chassis.
Maintaining the BlackDiamond X series
BlackDiamond X Series Switches Hardware Installation Manual 98