Installation manual

4 Answer each question based on the level of security needed for the particular management access
type.
Note
For more information about logging in to the switch and configuring switch management
access, see the ExtremeXOS User Guide.
5 At the password prompt, press [Enter].
The default user name admin has no password assigned to it.
When you have successfully logged on to the system, the command line prompt displays the
system name (for example, BlackDiamonX8>) in the prompt.
Note
For more information about how to assign a specific system name, see the ExtremeXOS
Concepts Guide.
6 Type configure vlan default ipaddress 123.45.67.8 255.255.255.0 to assign
an IP address and subnetwork mask for VLAN default.
Your changes take effect immediately.
7 Type save.
Your configuration changes are saved so that they will be in effect after the next system reboot. The
configuration is saved to the configuration database of the management modules in the switch.
8 Type logout.
Installing BlackDiamond X series Series Modules
BlackDiamond X Series Switches Hardware Installation Manual 71