Installation manual

1 At the back of the chassis, connect an AC power cord to the power input socket that corresponds to
each installed power supply.
Power input sockets are numbered from 1A to 8B from left to right, as you face the chassis back.
Figure 31: Numbers for Power Connectors
2 After all the power cords have been connected, set the power cord retainer over the power cord
connectors and against the back of the chassis.
3 Align and tighten the captive retaining screws on the power cord retainer.
Figure 32: Installing the AC Power Cord Retainer
Installing a BlackDiamond X series Series Chassis
BlackDiamond X Series Switches Hardware Installation Manual 58