Installation manual

c Lift the cover panel away from the chassis.
Figure 27: Removing the Power Supply Ventilation Cover
2 Identify the power supply bay where you will install the power supply.
Power supply bays are numbered from 1A to 8B. To establish an N+N redundant power
configuration, install power supplies in both the upper and lower rows.
Figure 28: Power Supply Bay Numbering on the Chassis
3 On the front of the power supply, push the release button to unlatch the insertion/ejector lever.
Installing a BlackDiamond X series Series Chassis
BlackDiamond X Series Switches Hardware Installation Manual 55