Installation manual

6 Pull apart the keyed corner of the lower packing foam and remove the lower packing foam from
around the chassis.
Figure 18: Removing the Accessories and Foam
7 On each side, remove the restraining bolts from the shipping brackets at the front and middle of the
chassis.
Figure 19: Unbolting the Chassis
8 Remove all the fan trays, one at a time.
a Completely loosen the retaining screws at the top and bottom of the fan tray.
b Holding both handles, pull straight outward on the fan tray to disconnect the internal connector.
Installing a BlackDiamond X series Series Chassis
BlackDiamond X Series Switches Hardware Installation Manual 48