Installation guide

Chapter 4: Maintenance Procedures
E4G Series Routers Hardware Installation Guide
90
Figure 67: Removing a T1/E1 Module
3 Align the replacement module with the card guides and carefully slide the module into the router
(Figure 68).
4 Align and tighten the retaining screws.
Figure 68: Installing a T1/E1 Module
5 Reboot the router to initialize the new T1/E1 module.
Removing an E4G-200 Series Router from an
Equipment Rack
To remove an E4G-200 Series router from an equipment rack:
1 De-energize the DC circuit for all power connections.
2 Loosen the retaining screws and unplug each DC power connector from the DC power socket on the
router.
CSR_032
CSR_014