Installation guide

Chapter 3: Installing an E4G Series Router
E4G Series Routers Hardware Installation Guide
58
Front-Mounting an E4G-400 Router in a Two-Post Rack
1 On each side of the router, use six screws to attach a bracket to the router (Figure 30).
Figure 30: Rack-mounting Bracket for Front-Mount installation
2 Slide the router into the equipment rack (Figure 31).
Figure 31: Installing the E4G-400 Router (Front-mount)
3 Insert and tighten rack-mounting screws to secure the router to the rack.
To install the power supply, see “Installing an AC Power Supply” on page 59 or “Installing a DC Power
Supply” on page 60.
To install optional ports at the back of the router, see “Installing Port Option Cards” on page 67.
CSR_004
CSR_005