Installation guide

Installing the E4G-200 Series Cell Site Routers
E4G Series Routers Hardware Installation Guide
49
Installing the Router in the Rack
To install the E4G-200 series router in an equipment rack:
1 Decide which position for the mounting brackets will be most suitable for the installation (Figure 17).
Figure 17: Positions for the Mounting Brackets
2 On each side of the router, attach a mounting bracket to the router in the selected mounting position
(Figure 17).
3 Slide the router into the equipment rack (Figure 18).
Figure 18: Installing the Router in the Rack
4 Insert and tighten rack-mounting screws to secure the router to the rack.
CSR_008
CSR_009