Installation guide
E4G Series Routers Hardware Installation Guide
47
CHAPTER
3
Installing an E4G Series Router
This chapter provides instructions to install an E4G series router and includes the following sections:
● Pre-installation Requirements on page 47
● Installing the E4G-200 Series Cell Site Routers on page 48
● Installing the E4G-400 Cell Site Aggregation Router on page 56
● Installing Port Option Cards on page 67
● Initial Startup on page 71
● Initial Management Access on page 71
Pre-installation Requirements
Rack mounting brackets and screws for attaching the brackets to the router are shipped with the
router. You must provide the following additional tools and equipment to install the router in an
equipment rack:
● Four rack mounting screws to match your equipment rack
● Screwdriver to fit the rack mounting screws
● ESD-preventive wrist strap for installing optional ports
For additional installation requirements, see the installation instructions for each router model.