Installation guide

E4G-400 Cell Site Aggregation Router
E4G Series Routers Hardware Installation Guide
23
Slot-A, Slot-B Steady green Port option card is installed in the indicated slot at the back
of the router.
Off No port option card is installed in the indicated slot at the
back of the router.
2-digit Stack Number Indicator
Left digit (1) Reserved for future use
Right digit (1 – 8)
Indicates the position
of this router in a
stacked configuration.
Upper half blinking This router is the stack master node.
Lower half blinking This router is the stack backup node.
Lit steadily This router is a standby node in the stack.
Ethernet Ports
1 through 28
Steady green Link OK
Blinking green Activity
Off No link, or port is disabled.
Management Port Steady green Link OK
Blinking green Activity
Off No link, or port is disabled.
Back Panel
Port LED on installed
XGM3S-2sf option card
Steady green Link OK
Blinking green Activity
Off No link, or port is disabled.
Port LED on installed
XGM3S-2xf option card
Steady green Link OK
Blinking green Activity
Off No link, or port is disabled.
Port LED on installed
XGM3SB-4xf option
card (S1 through S4)
Steady green Link OK
Blinking green Activity
Off No link, or port is disabled.
Port LED on installed
E4G-B16T1E1 module
(1 through16)
Steady green Link OK
Blinking green Activity
Off No link, or port is disabled.
Table 5: LEDs on the E4G-400 Cell Site Aggregation Router (Continued)
Type/Label Color/State Meaning