User guide

4-13
Chapter 4 Using Security Features
Remote Annex Server Tools for Windows NT
®
User Guide
Access-Request Attributes
ERPCD/ACP sends Access-Request packets which indicate how the user
connects to the Annex. This information is used by the server as a hint
or a restriction. The following section defines the available access-request
attributes:
User-Name
Indicates the name of the user that the RADIUS server will authenticate.
An unterminated ASCII string identical to the user name that ERPCD/
ACP retrieves via the user name prompt. You can specify up to 31
alphanumeric characters.
User-Password
Specifies the user password that the RADIUS server will authenticate.
CHAP-Password
Specifies the response value of a CHAP user in response to the password
challenge.
NAS-IP-Address
Indicates the IP address of the Annex authenticating the user or sending
an Accounting packet.
NAS-Port-Type
Specifies the Remote Annex port handling the user session. This value
corresponds to the physical port type. Supported port types:
• Async (0)
• ISDN Sync (2)
• ISDN Async V.120 (3)
• Virtual (5)