User guide

3-19
Chapter 3 Understanding Erpcd
Remote Annex Server Tools for Windows NT
®
User Guide
3. Enter one or more port numbers followed by @ and one or more
Remote Annex names or IP addresses.
Separate port numbers with commas and/or enter a range of
numbers with dashes (e.g.,
1,3,6-10@Annex01).
4. Enter a remote address followed by a local address.
Use an asterisk (wildcard) for any part of an IP address. You
must use spaces to separate the user name, port number/Remote
Annex, Local Address, and Remote Address fields.
Using Local and Remote Addresses
If the acp_dialup file contains a matching user name and local and remote
addresses exist in the file, the Remote Annex uses those values. If the
acp_dialup file contains a matching user name and a remote address but
not a local address, the Remote Annex uses the remote address from the
file, and uses the Remote Annex’s IP address for the local address.
If the file does not contain a matching user name, the Remote Annex uses
values from the local_address and remote_address parameters.
• If both parameters contain addresses, the Remote Annex uses
these values.
• If both parameters are set to
0.0.0.0, the Remote Annex
negotiates for both addresses with the remote PPP client. The
connection is denied for a remote SLIP client.
•Iflocal_address contains a value and remote_address is set to
0.0.0.0, the Annex uses the local address and negotiates with
the remote PPP client for the remote address. The connection is
denied for a remote SLIP client.