User guide

3-13
Chapter 3 Understanding Erpcd
Remote Annex Server Tools for Windows NT
®
User Guide
5. Enter an IP address for the gateway that is the next hop for the
route.
If you enter an asterisk, the Remote Annex uses the remote
address of the port as the gateway.
6. If necessary, you can enter a number from 1 to 15 to indicate the
number of hops to the destination, or -h to indicate that the
route is hardwired.
You can skip this step. You do not have to enter a number of
hops or
-h.
7. Type
end.
at_zone
The at_zone attribute lists AppleTalk zones on a network. To use this
attribute:
1. From the Bay Networks program group window, double-click
on the appropriate icon to open the acp_userinfo file.
The acp_userinfo file opens in the Notepad editor.
2. Find the area of the file where entry information resides and
type
at_zone.
3. Enter one or more zone names.
If you use more than one zone name, separate names using
spaces (e.g.,
at_zone zone1 zone2). Zone names use 1-32
characters; you cannot use non-printable characters. If you enter
a name that contains spaces, enclose the entire name in double
quotation marks.
4. Type
end.