User guide

3-5
Chapter 3 Understanding Erpcd
Remote Annex Server Tools for Windows NT
®
User Guide
time Keyword
The time keyword defines a period of time during which profile attributes
apply.
▼ To use this keyword, type time= followed by one or more of the following:
• A day of the week (e.g., Thursday).
• A specific date, including the month and the date
(e.g.,
March 1).
• A range of hours in hh:mm format (e.g.,
06:30). You must
enter start time and end time. You can enter
a.m. or p.m.
following the times.
If you do not enter a day and/or a date, erpcd applies the start and
end time every day of the week. If you omit
a.m. or p.m., the time
defaults to the 24-hour format.
protocol Keyword
The protocol keyword defines a protocol by which a user can connect to
a Remote Annex.
▼ To define a protocol, type protocol= followed by slip, ppp, or cli.
You cannot enter more than one protocol on a line. However, you
can repeat the
protocol= format and add a second or third profile.
annex and ports
Keywords
The annex and ports keywords specify the Remote Annexes and ports
to which profile attributes will apply.
▼ To list Remote Annexes and/or ports, type annex= and/or ports= followed
by one or more Remote Annex names or IP addresses and one or more port
numbers, respectively.
Use an asterisk to specify a partial Remote Annex name or IP
address. You can enter individual port numbers separated by
commas or a range of port numbers using dashes (e.g.,
ports=1,3,6-22).