Installation guide

Nortel Networks 5399 Access Switch Hardware Installation Guide
Chapter 3 ROM Monitor Commands
3-14
config
The configcommand displays the current configuration information and
revision levels for the Remote Access Concentrator. The config
command displaysrevisioninformation,the amountof memoryinstalled,
T1 or E1 configuration information, and a description of the number and
type of modems installed. The command syntax is:
config
The config command display for a Remote Access Concentrator with 24
modems (T1) looks similar to this:
This display is typical for E1 versions. For T1 and modem-less
versions, the information displayed in some of the fields will be
different than that shown in this example.
REVISION/CONFIGURATION INFORMATION
ROM Software Rev: 1110
Board ID: 64 Board Type: 5399
CPU Type: 486DX2 Ethernet Address: 00-80-2d-xx-xx-xx
Memory size: 8 Meg EEPROM size: 65504
Flash size: 2 Meg Flash ID: 0089
WAN 1: PRI E1 ETSI Revision: VERSION A MGR=1.159
WAN 2: PRI E1 ETSI Revision: VERSION A MGR=1.159
SLC 1
SLC SRAM Size: 128 K Modem Count: 31 Modem Rev: 0
SLC 2
SLC SRAM Size: 128 K Modem Count: 31 Modem Rev: 0
Hub Slot Hub CMB HW Rev Hub EE Rev Hub EE Seg Sel Hub Jmpr Seg Sel
10 01 0.0 N/A 00