Installation guide

Nortel Networks 5399 Access Switch Hardware Installation Guide
Chapter 2 Installing the Model 5399 Remote Access Concentrator Module
2-34
Invoking the Console Monitor
After the image boots, you can invoke the Console Monitor by
pressing on the service port terminal. The following prompt
appears:
Console monitor:
At the Console Monitor prompt, entering helpor ? displays the available
options:
•afd(displays the status of the Automatic Firmware
Download process - used only for the WAN interfaces).
•cli(starts the Command Line Interpreter on the current port)
• dump (from the Remote Access Concentrator to the host
and reboots).
• help or ? (displays the available options).
• info (displays configuration information for the Annex).
• leds (displays the current front panel LED status).
•quit(quits and returns to quiet console)
• reboot filename (reboots the Annex).
• rom (returns the Remote Access Concentrator to the ROM
Monitor).
• syslog (displays syslog messages).
Return