Installation guide

Nortel Networks 5399 Access Switch Hardware Installation Guide
Chapter 2 Installing the Model 5399 Remote Access Concentrator Module
2-24
If all requests fail, the Remote Access Concentrator will return to the
ROMmonitor(ifinTestmode)orcontinuetheauto-initializingprocedure
indefinitely (if in normal mode).
BOOTP
For a successful BOOTP retrieval, a bootpd must be running on a host
on the same subnet as the Remote Access Concentrator (or have a
correctly-configured router on the same subnet that supports BOOTP
forwarding) and must have the appropriate information in the bootptab
file.TheRemoteAccess Concentrator’s BOOTP implementation adheres
to rfc951, rfc1048, and rfc1084. A sample bootptab file entry used to
initialize the Remote Access Concentrator named terminator looks like
this:
In the previous example:
•
sm is the subnet mask.
•
gw is the load/dump gateway address.
•
vm is the Vendor Magic Cookie.
•
ht is host type (1=Ethernet).
•
ha is the Remote Access Concentrator’s hardware address
(Ethernet Address).
•
ip is the Remote Access Concentrator’s Internet Address.
remoteannexdefault:\
:sm=255.255.255.0:gw=132.245.22.66:\
:hn:vm=auto:to=-18000:
terminator:\
:ht=1:ha=00802d004879:ip=132.245.22.226:\
:tc=remoteannexdefault: