Installation guide

2-21
Chapter 2 Installing the Model 5399 Remote Access Concentrator Module
Nortel Networks 5399 Access Switch Hardware Installation Guide
13. Press y.
The Module Information menu is displayed.
14. Press twice.
The Slot Selection menu is displayed.
15. Press c and the slot number.
16. Verify the Remote Access Concentrator hardware
configuration by typing config and pressing at the
monitor prompt.
The screen display looks similar to this:
Escape
Return
REVISION/CONFIGURATION INFORMATION
ROM Software Rev: 1110
Board ID: 64 Board Type: 5399
CPU Type: 486DX2 Ethernet Address: 00-80-2d-xx-xx-xx
Memory size: 8 Meg EEPROM size: 65504
Flash size: 2 Meg Flash ID:0089
WAN 1: PRI E1 ETSI Revision: VERSION A MGR=1.159
WAN 2: PRI E1 ETSI Revision: VERSION A MGR=1.159
SLC 1
SLC SRAM Size: 128 K Modem Count: 31 Modem Rev: 0
SLC 2
SLC SRAM Size: 128 K Modem Count: 31 Modem Rev: 0
Hub Slot Hub CMB HW Rev Hub EE Rev Hub EE Seg Sel Hub Jmpr Seg Sel
9 01 0.0 N/A 00