Installation guide

Nortel Networks 5399 Access Switch Hardware Installation Guide
Chapter 4 Troubleshooting Procedures
4-16
Forhosts that maylimitfilenames to 14 characters(e.g.,System Vhosts),
a dump creates two additional directories under /usr/spool/erpcd/bfs.
Thenameofthefirstdirectoryisdump; the second directory uses the
Remote AccessConcentrator’sIP network addressasits name.The dump
file uses the Remote Access Concentrator’s IP host address as its name.
For example: /usr/spool/erpcd/bfs/dump/192.9.200/5.
The tftp dump names are user-defined. If a name is not
specified, the Remote Access Concentrator uses the bfs
convention.
Each dump file contains a complete image of the Remote Access
Concentrator RAM memory and hardware state. The amount of space
required for a dump file varies according to the port configuration. The
ROM Monitor config command displays the amount of memory for the
Remote Access Concentrator.
Table 4-6
shows sample dump file names. All pathnames are relative to
the file /usr/spool/erpcd/bfs.
Table 4-6. Remote Access Concentrator Dump File Naming Conventions
Remote Access
Concentrator
Address
Network
Address
BSD
Filename
System V Pathname
63.0.0.75 63 dump.63.0.0.75 dump/63/0.0.75
131.140.23.1 131.140 dump.131.140.23.1 dump/131.140/23.1
195.46.2.15 195.46.2 dump.195.46.2.15 dump/195.46.2/15