Technical data

Installing Site Manager on a SPARCstation
117342-B Rev. 00
10-9
Starting Site Manager from OpenView
Read this section if you plan to install or are currently running the HP OpenView
application on your SPARCstation.
After you install Site Manager on a workstation running HP OpenView, exit
HP OpenView and enter
ovw -fields
at the command line to integrate Site
Manager with the OpenView application and to update the symbols. Do this
instead of using the Update Symbols option on the OpenView Site Manager menu.
To start a Site Manager session from the IP Internet window menu bar in
OpenView:
1.
Open a view containing the icon of the router that you want to configure
using Site Manager.
The IP Internet window opens with a map of your internetwork.
2.
Click on the icon of the router you want to configure.
3.
From the Tools menu, choose Site Manager (Figure 10-3).
The Site Manager window opens with a list of tools.
4.
If the Site Manager tools are dimmed, delete the router from OpenView
so that it can be rediscovered.
Figure 10-3. Starting a Site Manager Session from OpenView
IP Internet
Edit View OptionsLocate
Help
File Monitor Test AdministerTools
MIB Application Builder: SNMP...
MIB Browser: SNMP...
Graph Collected Data: SNMP
Data Collection & Thresholds: SNMP...
Filter Editor...
Site Manager
SynOptics Application
Failing Resource Display...
Mail...
Print...
Site Manager...
Configuration (dynamic)...
Statistics Manager...
Trap Monitor...
Remote Files Manager...
Event Files...
Update Symbols...
U.2844.2