Technical data

Quick-Starting Routers
10-6
117342-B Rev. 00
Verifying Site Manager Installation
To verify the Site Manager installation and environment:
1.
Log in to a user account that you set up for Site Manager.
2.
Start the window environment (CDE or OpenWindows).
3.
Verify the Site Manager installation by entering:
wfchkinst
If the installation was successful, the workstation displays the message:
Installation is complete and correct!
4.
Verify the Site Manager environment by entering:
wfchkenv
If the environment is correctly configured, the workstation displays the
message:
Your environment seems to have been set up correctly.
Repeat steps 1 through 4 for each user account that has Site Manager installed.
Starting Site Manager
To start the Site Manager application:
1.
Log in with a user account that has been set up for Site Manager
operation.
2.
Start the window environment, for example, CDE.
3.
Change to a directory with read/write privileges where Site Manager can
save configuration and other files.
For example, the following command changes to the directory
/home/siteman/config_files:
cd /home/siteman/config_files
Note:
If your environment variables are incorrect, you receive an error
message to reset the variables.