Technical data

Quick-Starting Routers
5-10
117342-B Rev. 00
17.
Add the Telnet client.
telnet# client
client#
18.
Go back one level by entering:
client# back
telnet#
19.
Add the Telnet server.
telnet# server
20.
Return to root (box) level.
telnet# box
21.
Add TFTP to the router from the root level.
box# tftp
22.
Return to root (box) level.
tftp# box
23.
Add FTP to the router from the root level.
box# ftp
24.
Save your initial configuration file to the router’s volume as
startup.cfg
.
box# save config < volume >:startup.cfg
For example, enter:
box# save config 2:startup.cfg
Save the configuration as a file other than config until you can test the
configuration file.
25.
Test the initial IP interface by pinging the router’s own interface.
box# ping < ip_address>
For example, enter:
box# ping 192.168.125.34
26.
Test the initial IP interface by pinging the workstation where you use the
BCC or other configuration tool.
box# ping < ip_address>
For example, enter: