Technical data

117342-B Rev. 00
5-1
Chapter 5
Using the BCC to Quick-Start a Router
The Bay Command Console (BCC) is a command-line interface to your Bay
Networks router. You can configure and manage your BN and AN routers using
BCC commands. This chapter tells you how to use the BCC to quick-start a BN or
AN router and produce an initial configuration file called startup.cfg. Refer to the
following topics:
See “
Using the Quick-Start Worksheet on page 3-2 to collect the network
information you will need to quick-start the router with BCC commands.
Immediately after quick-starting with the BCC, secure your router.
For information, see Chapter 7, “
Securing the Router.”
This chapter provides only the information needed to create an initial interface.
You can continue the configuration with the BCC or another configuration tool,
such as Site Manager.
Topic Page
Overview of the BCC
5-2
Essential BCC Commands 5-4
Quick-Starting Your Router with the BCC 5-5
Quick-Start Troubleshooting with the BCC 5-13
Note:
You can use either the install.bat script or the BCC to establish an initial
IP interface. For information about using the script, see Chapter 4, “Using the
Installation Script to Quick-Start a Router.”