Technical data

Preparing Your Network Information

117342-B Rev. 00

3-13

PPP Information

(To enable PPP on a synchronous connector on this initial IP interface)

Enable PPP on the interface? Yes

IP address of peer connection 192.32.4.2

Enable PPP Echo protocol? Yes

Number of seconds between transmission of echo

requests

Acceptable loss of Echo-Reply packets 3

Enable local authentication protocol? Yes

Local PAP ID for this interface 192.32.4.1

Local PAP password (optional) lpwd

Authentication protocol enabled on remote peer? Yes

Remote peer PAP password rpwd

Enable Link Quality Reporting (LQR) protocol? Yes

Enable use of remote peer’s LQR timer? Yes

Minimum acceptable percentage of inbound packets 90

Minimum acceptable percentage of outbound packets 90

SMDS Information

(To enable SMDS on a synchronous connector on this initial IP interface)

Enable SMDS on the interface? Yes

Individual address C1617555433FFFF

Group address E16175556667FFFF

ARP address E16175550000FFFF

Table 3-3. Quick-Start Worksheet for WAN Protocols

(continued)

Network Information Example Your Information