Technical data

Preparing Your Network Information
117342-B Rev. 00
3-11
Logical IP Service Record Type
Signaling Version [1]:
1. UNI3.0
2. UNI3.1
1 (UNI3.0)
Do you want Auto Generation of the ATM address? (y/n)
[y]:
If you choose Auto Generation, router software will use a
combination of the MAC address and the network prefix
obtained from the server to generate a unique ATM
address.
If you do not choose Auto Generation, enter a 7-byte
User Part (Mandatory) and a 13-byte Net Prefix
(Optional) to be combined into a 20-byte ATM address.
Enter User Part (Mandatory), 7 bytes:
Enter Net Prefix (Optional), 13 bytes:
No
12345677654321
3900000000000000000
0000000
Choose the ATM ARP Mode.
-Client Mode [Default]
-Server Mode
If you choose the default (Client Mode), you must enter
the ARP Server ATM Address.
Would you like to accept Client Mode for ATM ARP?
(y/n) [y]:
Ye s
Enter ARP Server ATM Address in hexadecimal format,
omitting leading 0x/0X.
Enter Network Prefix (Mandatory), 13 bytes:
Enter User Part (Mandatory), 7 bytes:
3900000000000000000
0000000
11111111111111
Refer to Table 3-1
, the Quick-Start Worksheet, to continue the initial configuration.
Table 3-2. Quick-Start ATM Worksheet
(continued)
Network Information Example Your Information