Technical data

Preparing Your Network Information
117342-B Rev. 00
3-9
Table 3-2. Quick-Start ATM Worksheet
Network Information Example Your Information
ATM Physical Link Information
Slot number of the link module 4 (ATMC_OC3MM)
Connector number [1]: 1 (ATM1)
Choosing a Service Record Type
Enter ATM Service Record Type [1]:
1. ATM PVC
2. ATM LAN Emulation
3. ATM Logical IP Subnet
Continue with the information for your service record
type.
1 (ATM PVC)
PVC Service Record Type
Enter encapsulation type [1]:
1. LLC/SNAP (RFC 1483)
2. NLPID (RFC 1490)
2 (NLPID (RFC 1490))
For VPI, enter a number from 0 to 255.
The VPI (virtual path identifier) number of the initial PVC
identifies the virtual path of the PVC. The VPI is part of
the cell header. The header can contain a maximum of 8
VPI bits. This bit range allows for path identifiers from 0
through 255.
0
For VCI, enter a valid number in these ranges:
- ARE module in a BLN/BCN router:
32 - 65535
- Model 5780 ATM VNR in a Model 5000AH chassis:
130 - 2047
- Model 5782 ATM VNR in a Model 5000BH chassis:
130 - 2047
The VCI (virtual channel identifier) number of the initial
PVC identifies the virtual channel portion of the PVC.
The VCI is part of the cell header and has a length of
16 bits.
200
(continued)