Technical data

Quick-Starting Routers
3-6
117342-B Rev. 00
Global Services Information
These steps set communication services globally for all the interfaces on the router. You can increase
router security by restricting SNMP communities, FTP, and Telnet. See Chapter 7, “
Securing the Router.”
Enable SNMP Community Management? Yes
For each SNMP community, decide whether it is public or
private, its read-write access, and IP address of the
manager.
public, read-only,
192.32.20.12
Enable TFTP? Yes
Default volume where TFTP transactions will take place 2
Enable FTP? Yes
Default volume where FTP transactions will take place 2
Enable Telnet? Yes
Enable Telnet client? Yes
Enable Telnet server? Yes
Enable the HTTP (Web) server?
Provides embedded Web tools on the router to view
device information. BCC users should enable the HTTP
Server with Site Manager after quick-starting the router.
Ye s
Workstation Information
IP address of the workstation you will use to configure
the router
192.32.20.12
Table 3-1. Quick-Start Worksheet
(continued)
Network Information Example Your Information