Technical data

117342-B Rev. 00
3-1
Chapter 3
Preparing Your Network Information
This chapter provides a series of worksheets to help you collect the information
you will need to quick-start the router using either the installation script or BCC
commands. This chapter provides the following information:
Whether you use the installation script or BCC commands, you quick-start the
router as follows:
1.
Select an interface and supply information about its connector and circuit.
2.
Configure IP on the interface.
3.
Enable these global communication services (optional):
•SNMP
• TFTP
•FTP
•Telnet
• HTTP Server
4.
Save the configuration file as startup.cfg.
5.
Test the initial configuration by pinging the workstation you will use to
continue the configuration.
Topic Page
Using the Quick-Start Worksheet
3-2
Using the Quick-Start ATM Worksheet 3-7
Using the Quick-Start Worksheet for WAN Protocols 3-12