Technical data

Preparing the Router for Quick-Start
117342-B Rev. 00
2-9
3.
Note the available free space on the router volume.
You should always make sure you have enough space on the volume to hold
any new files you create or copy.
In the following steps, you verify that the correct router software,
configuration, and installation files are available. These steps may not be
necessary for new routers with the files already installed, although they will
help you become familiar with your router’s files.
4.
Verify that the directory lists the Quick-Start installation files shown in
Ta b l e 2 - 3
.
5.
Verify that all router files belong to the same software version.
For example, you should not use a Version 11.00 install.bat script with
BayRS Version 12.10 files.
Table 2-3. Quick-Start Installation Files
File Name*
* All router files must belong to the same software version. Other files may be in the
directory. Router file names may vary slightly; for example, System 5000 net modules use
the
ti_5000.cfg
file.
File Type
bn.exe Bootable router software image (see
Ta ble 2 - 4
for other router images)
config Default configuration file
debug.al Alias file
install.bat Quick-Start installation script file
ti.cfg Initial configuration file
bcc.help BCC Help file