Technical data

Preparing the Router for Quick-Start
117342-B Rev. 00
2-5
For information about the location of the connector on your router, see the
installation guide that came with your router.
2.
Connect the cable to the network connector.
The network connection depends on your LAN or WAN configuration. For
general information about cables, see the Cable Guide.
Logging On to the Technician Interface
When you connect to a Bay Networks router and establish a terminal session, the
Technician Interface Login prompt appears. The Technician Interface is a
command-line interface provided with every Bay Networks router.
You use the Technician Interface to:
• View the router’s file system.
• Run the Quick-Start installation script.
• Access the BCC.
• Enter commands to manage your router and its MIB variables.
To log on to the Technician Interface, enter:
Manager
The Technician Interface displays a prompt consisting of the slot where the
Technician Interface is running, followed by the $ prompt, for example:
2$
To log off the Technician Interface, enter:
logout