Technical data

Quick-Starting Routers
xiv
117342-B Rev. 00
.
Before You Begin
Before using this guide, you must complete the following procedures:
• Install the router (refer to the installation guide that came with your router):
-- Installing and Maintaining BN Routers
-- Installing and Maintaining ASN Routers
-- Installing and Operating BayStack AN and ANH Routers
-- Installing and Operating BayStack ARN Routers
-- Quick Installation and Reference for the System 5000 Net Modules
• Review the Read Me First and Release Notes documents for any changes to
the Quick-Start instructions.
If you want to Go to
Review a summary of the Quick-Start procedure. Chapter 1
Prepare your router for the Quick-Start procedure by
connecting your router to a PC, terminal, or IP network and
establish a Technician Interface session.
Chapter 2
Prepare network information for the Quick-Start procedure. Chapter 3
Use the installation script to quick-start a router. Chapter 4
Use the BCC to quick-start a router. Chapter 5
Complete the router configuration. Chapter 6
Secure your router. Chapter 7
Install Site Manager on a PC running Windows 95. Chapter 8
Install Site Manager on a workstation running Windows NT. Chapter 9
Install Site Manager on a SPARCstation. Chapter 10
Install Site Manager on an IBM workstation. Chapter 11
Install Site Manager on an HP 9000 workstation. Chapter 12
View a sample installation script. Appendix A
View a sample ATM installation script. Appendix B