Technical data

Sample ATM Installation Script

117342-B Rev. 00

B-7

Default file name is startup.cfg on the current volume.

NOTE: Do *NOT* name this file 'config'. Later, you may wish to rename

this file 'config' after you perform a named boot and verify its

operation.

Enter file name [startup.cfg]:

-----------------------------------------------------------------------

Step 9. Test this initial IP interface configuration.

IP Interface 192.168.125.34 is up.

Testing local IP interface.

ping -IP 192.168.125.34 -r5

IP ping: 192.168.125.34 is alive (size = 16 bytes)

This test attempts to ping the Site Manager workstation.

NOTE: If routing has not yet converged, an attempt

to ping the Site Manager workstation may fail. If

this happens, you may either enter a new IP address or

quit and wait a short period of time and try again from

the Technician Interface command line.

Type q<return> to cancel this test.

Enter IP address of Site Manager workstation: 192.32.20.12

IP Interface 192.32.20.12 is alive.

...

The router installation procedure has completed.

-------------------------------------------------------------------------------