Technical data

Sample ATM Installation Script
117342-B Rev. 00
B-3
-------------------------------------------------------------------------------
Step 2. Specify the Link Module and network interface information for
the initial IP connection to the Site Manager.
Link Module: ATMC_OC3MM
Connector Menu
--------------
1. ATM1
Enter connector number [1]:
ATM Service Record Selection Menu
---------------------------------
1. ATM PVC
2. ATM LAN Emulation
3. ATM Logical IP Subnet
Enter ATM Service Record Type [1]: 2
Configuring LANE ATM Service Record
----------------------------------
Enter Signaling Version
------------------------
1. UNI3.0
2. UNI3.1
Signaling Version [1]: 2
ATM Signaling UNI3.1 Has Been Enabled
--------------------------------------------
ATM Address Configuration
-------------------------
If you choose Auto Generation, router software will use
combination of MAC address and network prefix queried from server
to generate a unique ATM address.
If you do not choose Auto Generation, please enter a 7-byte
User Part (Mandatory) and a 13-byte Net Prefix (Optional) to
be combined to a 20-byte ATM address.
Do you want Auto Generation of ATM address? (y/n) [y]: n
Please enter ATM address in hex format, omit leading 0x/0X