Technical data

Sample Installation Script
117342-B Rev. 00
A-7
-------------------------------------------------------------------------------
Configuration Summary
---------------------
Link Module: QE/NF
Connector: 1
Slot: 5
Circuit Name: E51
IP address: 192.32.125.34
IP subnetwork mask: 225.225.225.0
Routing Protocol: RIP1
Default Rt. Listen: No
TFTP Default Volume: 3:
FTP Default Volume: 3:
TI TELNET: Yes
HTTP Server: Yes
Press [RETURN] to continue:
-------------------------------------------------------------------------------
Step 8. Specify a name for the configuration file.
Save configuration to a file.
-----------------------------
The Quick-Start configuration of the router is now complete and active.
Do you wish to save this configuration to a file? (y/n)[y]:
Default file name is startup.cfg on the current volume.
NOTE: Do *NOT* name this file ’config’. Later, you may wish to rename
this file ’config’ after you perform a named boot and verify its operation.
Enter file name [startup.cfg]:
-------------------------------------------------------------------------------
Step 9. Test this initial IP interface configuration.
TEST IP Interface
-----------------
IP Interface 192.32.125.34 is up.
Testing local IP interface.