Technical data

Quick-Starting Routers
12-6
117342-B Rev. 00
Starting Site Manager
To start the Site Manager application:
1.
Log in with a user account that has been set up for Site Manager
operation.
2.
Start the window environment.
3.
Change to a directory with read/write privileges where Site Manager can
save configuration and other files.
For example, the following command changes to the directory
/home/siteman/config_files:
cd /home/siteman/config_files
4.
Activate Site Manager by entering the following command:
wfsm -a
<router_IP_address >
&
<router_IP_address>
is the IP address of the router’s initial interface.
For example, the following command starts Site Manager and connects to a
router with the IP address 192.168.125.34:
wfsm -a 192.168.125.34 &
The Site Manager window opens (Figure 12-1).
After you successfully install and start Site Manager, see Configuring and
Managing Routers with Site Manager for more information.